Everyday Tools

Roof Pitch Calculator

Convert the vertical rise and horizontal run of a roof section to rise per 12 units of run, an angle in degrees, and percent slope.

01

Your inputs

02

Your result

Ready when you are.

Adjust the inputs, then calculate to see your result here.

Calculated on your device.

GET MORE FROM YOUR RESULT

Using the Roof Pitch Calculator

Enter the rise and horizontal run in the same unit, such as inches or centimeters. Use the level horizontal distance from the low point to the high point.

Worked example

A rise of 6 over a horizontal run of 12 gives a slope of 6 ÷ 12 = 0.5. That is a 6:12 pitch, an angle of about 26.57°, and a 50% slope.

Example inputs

Vertical rise
6
Horizontal run
12

Example result

Rise per 12 units of run
6
Angle (degrees)
26.565051
Slope (%)
50

Method and assumptions

Divide rise by horizontal run. Multiply by 12 for pitch, by 100 for percent slope, or take the arctangent for the angle.

Turn an estimate into an order

A geometric quantity is a starting point for purchasing. Check whether the supplier sells by bag, box, mass or bulk volume, and use the stated coverage or yield to convert the result. Round only after accounting for the chosen allowance and packaging increments. For irregular spaces, divide the job into simpler sections and combine quantities with the same units.

Common question

How do I use the result to estimate roof area?

Take the rise per 12 units of run and enter it in the Roofing Calculator with the horizontal footprint. That tool estimates surface area for a uniformly pitched roof.